China wholesaler CHINAMFG CHINAMFG Model 7450 Variable Servo Plunger Motor Hydraulic Motor 72450-Dag-02 72450-Dah-02 72450-Dam-02 with Good quality

Product Description

 

[Features]

Our company now supplies a large number of piston pumps, motors, hydraulic valve, vane pump, gear pump,hydraulic cyliner ,hydraulic accumulator ,reducers and related spare parts. The main manufacturers are: Rexroth, Hitachi, Komatsu, Kawasaki,NACHI , Toshiba, CHINAMFG / Katoetc,Parker ,Nachi,Yuken,Eaton,Vickers,JEIL,KAYABA,HAWE,SAM,KOKIWA,OILGEAR,MESSORID and other products.

 

PocLlain Hydraulics Motor Hydraulic Motor Category Introduction:
1. MS series (multi -purpose): MS/MSE02, MSE03, MS/MSE05, MS/MSE08, MS/MSE11, MS/MSE18, MS25, MS35, MS50, MS83, MS125
2. MK series (compact type): MK04, MKD04, MK05, MK09, MK/MKE12, MK/MKE18, MK/MKE23, mk35, mk47, mk47
3. MG series: MG/MGE02 Series, MG/MGE11 Series, MG21 Series
4. CHINAMFG series: MW14 Series, MW24 Series, MW50 Series

Rexroth Series:

A4V40; A4V56; A4V71; A4V125; A4V250; A4VFO28; A4VSO40; A4VSO71; A4VSO125; A4VSO180; A4VSO250; A4VSO355; A4VSO500; A4VF500 /
A4F500; A4VG28 (A4F571); A4VG50;; A4VG40; A4VG45 A4VG56; A4VG71; A4VTG71; A4VG90 (A4VT90HW / 32R); A4VHW90; A4VTG90 charge pump
(Laid thick); A4VG125; A4VG125 Charge pump; A4VG125 charge pump (general use type); A4VG125 charge pump (A10VO28 string type);
A4VG12 charge pump (large).
A10VG18 A10VG28 A10VG45 A10VG63

A22VG045

A24VG

A28VLO520

A11VLO

A8VO

A20VO  520
Rexroth bent axis pump series:
A2F5;A2F12;A2F23;A2VK28;2VK28;A2F28;A2F55;A2F80;A2F107;A2F160;A2F200;
A2V225;A2F250;A2V500;A2V915;A2F355;A2F500;A2F1000;A2FO10;A2FO12;A2FO16;A2FO23;A2FO28;A2FO32;A2FO45; A2FO56; A2FO63; A2FO80; A2FO90
/ A2FE90; A2FO107; A2FO125 (A2FM125); A2FO200;; A2FO160; A2FO180 A2FO250; A2FO500; A6V28; A7V55 / A8V55; A7V58; A7V80 / A8V80;
A7V107 / A8V107; A7V160 / A8V160; A7V200; A7V225 ; A7V250; A7V355; A7V500; A6VM / A7V1000; A6VM / A7VO12; A7VO28; A7VO55; A7VO80;
A7VO107; A7VO160; A6VM160; A6VE160; A6VM200; A6VM500; A7VO172; A7VO200; A7VO250; A7VO355; A7VO500.

Sauer Series:

PV20; PV21 (PVD21); PV22; PVD22 dual pump; PV23 (PVD23); PV24; SPV6 / 119; PV25; PV26; PV112; OPV27; MF16A; MFO35; MF500; MPVO46 /
M46; MPR63; MPV45.

Sauer  Sunstrand Hydraulic Motor.
90K 55, 90K 75.
90M 55, 90M 75, 90M 100, 90M 130.
MF 20, MF 21, MF 22, MF 23, MF 24, MF 25, MF 26, MF 27.
SMF 20, SMF 21, SMF 22, SMF 23, SMF 24, SMF 25, SMF 26, SMF 27.
H1 060, H1 080, H1 110, H1 160, H1 210, H1 250.
H1B 060, H1B 080, H1B 110, H1B 160, H1B 210, H1B 250.
T90 Series 055, 075, 100
T90 (M) Series 055 MF, 075 MF, 100 MF.
Series 90 030 MF, 042 MF, 055 MF, 075 MF, 100 MF, 130 MF.
Series 90 055 MV, 075 MV.
Series 20 (frame size) 070, 089, 227, 334.
Series 51 / 51V (frame size) 060, 080, 110, 160, 250.
New or Reusable Spares of Hydraulic Motors like Shaft, Rotor, Cylinder Block, Pistons, Piston Rings, Pressure Plate, Swash Plate,
Ball Xihu (West Lake) Dis., Bearings, Retainer Plate, Springs, Distributor, Covers, Control Valve, Seal Kits and others can be supplied.

Eaton CHINAMFG Series:
3321/3331 (Eaton 006); CHINAMFG 3322 (EATON3322); 4621/4621-007; 5421/5431 (Eaton 23); Case 1460 (CASE1460); Case CS05A; CHINAMFG 3932-243; CHINAMFG 6423; 7621 (Eaton 24-7620); Road roller (Eaton 78462). CHINAMFG series: PVE19;TA19;PVE21;PVH45;PVH57;PVH74;PVH81;PVH98;PVH106(HPN-1398);PVH131;PVH141;PVB5;PVB6;PVB10;PVB15(PVQ32 some common);PVB20;PVB29;PVBQA29-SR;PVQ40 /50; PVB110; TB35; B45

Parker series
PVP16/23/33/41/48/60/76/100/140;

PVM16/23/28;PV016/571/571/571/032/040/046/063;

F11-005/006/012/014/019/10/28/39/80/110/150/250;

F12-030/040/060/080/110/125/150/250;

V12-060/080
V14-110/160;

P2/P3-060/075/105/145;

PAVC 33/38/65/100

YUKEN hydraulic pump
AR variable piston pump: AR16, AR22

A variable piston pump: A10,A16,A22,A37,A40,A45,A56,A70,A80,A90,A125,A145

A3H variable piston pump: A3H16 A3H37 A3H56 A3H70 A3H100 A3H145 A3H180

Vane pump: PV2R PV2R2 PV2R3 PV2R4 PV2R21 PV2R23 PV2R42 PV2R43

LINDE Model Number
Linde
HMF63-01
MPF55-01
MPR28 MPR45 MPR63 MPR71-01
HPR75-01 HPR90-01 HPR100-01 HPR130-01 HPR160-01
HPR55 HPR75 HPR105 HPR135 HPR165 HPR210
MPV45-01 MPV63-01
HMR75-02 HMR105-02 HMR135-02 HMR165-02 HMR210-02 HMR280-02
BPV35 BPV50 BPV70 BPV100 BPV200
B2PV35 B2PV50 B2PV75 B2PV105 B2PV140 B2PV186
BMF35 BMF55 BMF75 BMF105 BMF135 BMF140 BMF186 BMF260
BMV35 BMV55 BMV75 BMV105 BMV135 BMV140
BPR55 BPR75 BPR140 BPR186 BPR260
HPV55T HPV75 HPV105 HPV135 HPV165 HPV210 HPV280
HMF28 HMF35 HMF50 HMF55 HMF75 HMF105 HMF135 HMF165 HMF210 HMF280
HPV130-01

[Products]

[Company Profile ]

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: GS, ISO9001
Excitation Mode: SACS
Power Rating: 2000W
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

servo motor

Are there common issues or challenges associated with servo motor systems, and how can they be addressed?

Servo motor systems are widely used in various applications, but they can encounter common issues or challenges that affect their performance and reliability. Let’s explore some of these issues and discuss potential solutions:

1. Positioning and Tracking Errors:

One common challenge in servo motor systems is positioning and tracking errors. These errors can occur due to factors such as mechanical backlash, encoder resolution limitations, or disturbances in the system. To address this issue, careful calibration and tuning of the servo control system are necessary. This includes adjusting feedback gains, implementing feedback filtering techniques, and utilizing advanced control algorithms to improve the system’s accuracy and minimize errors. Additionally, employing high-resolution encoders and backlash compensation mechanisms can help enhance the positioning and tracking performance.

2. Vibration and Resonance:

Vibration and resonance can impact the performance of servo motor systems, leading to reduced accuracy and stability. These issues can arise from mechanical resonances within the system or external disturbances. To mitigate vibration and resonance problems, it is crucial to analyze the system’s dynamics and identify critical resonant frequencies. Implementing vibration dampening techniques such as mechanical isolation, using vibration-absorbing materials, or employing active vibration control methods can help minimize the effect of vibrations and improve the system’s performance.

3. Overheating and Thermal Management:

Servo motors can generate heat during operation, and inadequate thermal management can lead to overheating and potential performance degradation. To address this issue, proper cooling and thermal management techniques should be employed. This may involve using heat sinks, fans, or liquid cooling systems to dissipate heat efficiently. Ensuring adequate ventilation and airflow around the motor and avoiding excessive current or overloading can also help prevent overheating. Monitoring the motor’s temperature and implementing temperature protection mechanisms can further safeguard the motor from thermal damage.

4. Electrical Noise and Interference:

Electrical noise and interference can affect the performance and reliability of servo motor systems. These issues can arise from electromagnetic interference (EMI) or radio frequency interference (RFI) from nearby equipment or electrical sources. To mitigate electrical noise, proper shielding and grounding techniques should be employed. Using shielded cables, ferrite cores, and grounding the motor and control system can help minimize the impact of noise and interference. Additionally, employing filtering techniques and surge protection devices can further improve system robustness against electrical disturbances.

5. System Integration and Compatibility:

Integrating a servo motor system into a larger control system or automation setup can present challenges in terms of compatibility and communication. Ensuring proper compatibility between the servo motor and the control system is crucial. This involves selecting appropriate communication protocols, such as EtherCAT or Modbus, and ensuring compatibility with the control signals and interfaces. Employing standardized communication interfaces and protocols can facilitate seamless integration and interoperability. Additionally, thorough testing and verification of the system’s compatibility before deployment can help identify and address any integration issues.

6. Maintenance and Service:

Maintenance and service requirements are important considerations for servo motor systems. Regular maintenance, including lubrication, inspection, and cleaning, can help prevent issues related to wear and tear. Following manufacturer-recommended maintenance schedules and procedures is essential to ensure the longevity and optimal performance of the motor. In case of any malfunctions or failures, having access to technical support from the manufacturer or trained service personnel can help diagnose and address problems effectively.

By being aware of these common issues and challenges associated with servo motor systems and implementing appropriate solutions, it is possible to enhance the performance, reliability, and lifespan of the servo motor system. Regular monitoring, proactive maintenance, and continuous improvement can contribute to optimizing the overall operation and efficiency of the system.

servo motor

What is the significance of closed-loop control in servo motor operation?

Closed-loop control plays a significant role in the operation of servo motors. It involves continuously monitoring and adjusting the motor’s behavior based on feedback from sensors. The significance of closed-loop control in servo motor operation can be understood through the following points:

1. Accuracy and Precision:

Closed-loop control allows servo motors to achieve high levels of accuracy and precision in positioning and motion control. The feedback sensors, such as encoders or resolvers, provide real-time information about the motor’s actual position. This feedback is compared with the desired position, and any deviations are used to adjust the motor’s behavior. By continuously correcting for errors, closed-loop control ensures that the motor accurately reaches and maintains the desired position, resulting in precise control over the motor’s movements.

2. Stability and Repeatability:

Closed-loop control enhances the stability and repeatability of servo motor operation. The feedback information enables the control system to make continuous adjustments to the motor’s inputs, such as voltage or current, in order to minimize position errors. This corrective action helps stabilize the motor’s behavior, reducing oscillations and overshoot. As a result, the motor’s movements become more consistent and repeatable, which is crucial in applications where the same motion needs to be replicated accurately multiple times.

3. Compensation for Disturbances:

One of the key advantages of closed-loop control is its ability to compensate for disturbances or variations that may occur during motor operation. External factors, such as friction, load changes, or variations in the operating environment, can affect the motor’s performance and position accuracy. By continuously monitoring the actual position, closed-loop control can detect and respond to these disturbances, making the necessary adjustments to maintain the desired position. This compensation capability ensures that the motor remains on track despite external influences, leading to more reliable and consistent operation.

4. Improved Response Time:

Closed-loop control significantly improves the response time of servo motors. The feedback sensors provide real-time information about the motor’s actual position, which allows the control system to quickly detect any deviations from the desired position. Based on this feedback, the control system can adjust the motor’s inputs promptly, allowing for rapid corrections and precise control over the motor’s movements. The fast response time of closed-loop control is crucial in applications where dynamic and agile motion control is required, such as robotics or high-speed automation processes.

5. Adaptability to Changing Conditions:

Servo motors with closed-loop control are adaptable to changing conditions. The feedback information allows the control system to dynamically adjust the motor’s behavior based on real-time changes in the operating environment or task requirements. For example, if the load on the motor changes, the control system can respond by adjusting the motor’s inputs to maintain the desired position and compensate for the new load conditions. This adaptability ensures that the motor can perform optimally under varying conditions, enhancing its versatility and applicability in different industrial settings.

In summary, closed-loop control is of significant importance in servo motor operation. It enables servo motors to achieve high levels of accuracy, stability, and repeatability in position and motion control. By continuously monitoring the motor’s actual position and making adjustments based on feedback, closed-loop control compensates for disturbances, enhances response time, and adapts to changing conditions. These capabilities make closed-loop control essential for achieving precise and reliable operation of servo motors in various industrial applications.

servo motor

How does feedback control work in a servo motor system?

In a servo motor system, feedback control plays a crucial role in achieving precise control over the motor’s position, speed, and acceleration. The feedback control loop consists of several components that work together to continuously monitor and adjust the motor’s behavior based on the desired and actual position information. Here’s an overview of how feedback control works in a servo motor system:

1. Position Reference:

The servo motor system starts with a position reference or a desired position. This can be specified by a user or a control system, depending on the application requirements. The position reference represents the target position that the servo motor needs to reach and maintain.

2. Feedback Sensor:

A feedback sensor, such as an encoder or resolver, is attached to the servo motor’s shaft. The purpose of the feedback sensor is to continuously measure the motor’s actual position and provide feedback to the control system. The sensor generates signals that indicate the motor’s current position, allowing the control system to compare it with the desired position.

3. Control System:

The control system receives the position reference and the feedback signals from the sensor. It processes this information to determine the motor’s current position error, which is the difference between the desired position and the actual position. The control system calculates the required adjustments to minimize this position error and bring the motor closer to the desired position.

4. Controller:

The controller is a key component of the feedback control loop. It receives the position error from the control system and generates control signals that govern the motor’s behavior. The controller adjusts the motor’s inputs, such as voltage or current, based on the position error and control algorithm. The control algorithm can be implemented using various techniques, such as proportional-integral-derivative (PID) control, which adjusts the motor’s inputs based on the current error, the integral of past errors, and the rate of change of errors.

5. Motor Drive:

The control signals generated by the controller are sent to the motor drive unit, which amplifies and converts these signals into appropriate voltage or current levels. The motor drive unit provides the necessary power and control signals to the servo motor to initiate the desired motion. The drive unit adjusts the motor’s inputs based on the control signals to achieve the desired position, speed, and acceleration specified by the control system.

6. Motor Response:

As the motor receives the adjusted inputs from the motor drive, it starts to rotate and move towards the desired position. The motor’s response is continually monitored by the feedback sensor, which measures the actual position in real-time.

7. Feedback Comparison:

The feedback sensor compares the actual position with the desired position. If there is any deviation, the sensor generates feedback signals reflecting the discrepancy between the desired and actual positions. These signals are fed back to the control system, allowing it to recalculate the position error and generate updated control signals to further adjust the motor’s behavior.

This feedback loop continues to operate in a continuous cycle, with the control system adjusting the motor’s inputs based on the feedback information. As a result, the servo motor can accurately track and maintain the desired position, compensating for any disturbances or variations that may occur during operation.

In summary, feedback control in a servo motor system involves continuously comparing the desired position with the actual position using a feedback sensor. The control system processes this position error and generates control signals, which are converted and amplified by the motor drive unit to drive the motor. The motor’s response is monitored by the feedback sensor, and any discrepancies are fed back to the control system, enabling it to make further adjustments. This closed-loop control mechanism ensures precise positioning and accurate control of the servo motor.

China wholesaler CHINAMFG CHINAMFG Model 7450 Variable Servo Plunger Motor Hydraulic Motor 72450-Dag-02 72450-Dah-02 72450-Dam-02   with Good quality China wholesaler CHINAMFG CHINAMFG Model 7450 Variable Servo Plunger Motor Hydraulic Motor 72450-Dag-02 72450-Dah-02 72450-Dam-02   with Good quality
editor by CX 2024-04-03