Position Control Servo Motor Kit for Robot & CNC

Position Control Servo Motor Kit for Robot & CNC

 Position Control Servo Motor Package For Robot & cnc

57IV90/57IV130/57IV180 Features
1.Operating voltage: DC enter voltage 15VDC to 50VDC ,advise voltage is 36V
2.The max steady output recent is 10A, the max peak present is 22A (3 occasions overload capability) 
three.Satisfactory differential or solitary-ended pulse / direction command, have a few manage mode of situation, velocity and torqe
four.Utilizing FOC magnetic position manage technology and room vector pulse width modulation (SVPWM) closed-loop handle engineering
5.The variety of pulses for every cycle (subdivision) can be set by the debug software or the dial switch location(digital gear ratio)
six.Have 3 kinds of 90w,130w and 180w DC brushless servo motor to select.
seven.Have security of overvoltage, undervoltage, overcurrent and tolerance,and so forth.
8.Solitary / double pulse manner, the pulse valid edge can be pick.
9.The max pulse frequency of handle instruction is 500KHz (manufacturing facility default is 200KHz)
ten.Pulse, direction and permit sign input interface stage is 4.5 to 28V appropriate
eleven.With serial RS232 / RS485 debugging perform, but need to use our particular serial debugging cable 
12.Functionality: clean speed, little overshoot ,small tracking error, low warmth of motor and driver

Driver Design And Variety Xihu (West Lake) Dis.

Motor Type  57IV90 57IV130 57IV180
Rated power(W) 90W 130W 180W
Vector Maximum Current 16A 18A 22A
Body Length(MM) 106.2 0.five 126.2 0.5 146.2 0.5
Operation Voltage 15-50Vdc,36Vdc recommend 
Overvoltage Protection Voltage 68Vdc±2
Control Method 32 bits DSP vector FOC control technology
Pulse Limit Frequency 500KHz(factory default 200KHz)
Protection Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm
Input Signal  Pulse, direction and enable differential / single-ended interface signal,
interface level 4.5-28Vdc compatible, no need external current limiting resistor
Output Signal  Alarm / in-position signal OC output, the output capacity is100mA, need external
pull-up resistor, the maximum pull up voltage is 24Vdc
Electronic Gear Ratio Default 4000 / rev, through the DIP switch or debug software setting subdivision
(200-51200)
Position Error Control Accuracy ±1 Pulse
Speed Control Accuracy  ±2 rpm
Maximum  Acceleration 100 rpm/ms

Dialing Change Settings

Pulse/Rev. SW1 SW2 SW3 SW4
Default ON ON ON ON
800 OFF ON ON ON
1600 ON OFF ON ON
3200 OFF OFF ON ON
6400 ON ON OFF ON
12800 OFF ON OFF ON
25600 ON OFF OFF ON
51200 OFF OFF OFF ON
a thousand ON ON ON OFF
2000 OFF ON ON OFF
4000 ON OFF ON OFF
5000 OFF OFF ON OFF
8000 ON ON OFF OFF
10000 OFF ON OFF OFF
20000 ON OFF OFF OFF
40000 OFF OFF OFF OFF

Subdivision precision (electronic equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the travel makes use of the inside default micro-step subdivision, the default internal subdivision of the driver is 400Pulse / rev, and the digital gear ratio can also be set by the debugging software program. SW5 set the motor route,when turnON, the motor turns clockwise (CW),when turn OFF, the motor turns counterclockwise(CCW). SW6 management mode selection, whenON, the motor enters the self-examination manner,producing one CZPT and reverse revolution, has been recurring until finally exit self-check method, the external manage signal is invalid at self examination mode, whenOFF, the motor exits self-examination method,then the external handle sign is legitimate.

Mechanical Framework Dimension

 Driver mode Motor body length(mm) Driver thickness(mm) Integrated motor driver length(mm)
57IV90 76 thirty.2 106.2
57IV130  ninety six 30.2 126.2
57IV180  116 30.2 149.2

Note : All earlier mentioned is normally used, and we can personalize according to your ask for or pick the suitable model for you, remember to notify us subsequent parameters: current, voltage, holding torque, body size,the software spot.

Application
Ideal for all types of little and medium-sized automation equipments and devices. Such as: laser products, medical products, 3D printer, tiny and medium-sized engraving equipment, electronic processing tools, computerized crawling equipment, specific CNC machine resource, packaging products and robotic. It is particularly helpful for users who anticipate low noise and substantial pace applications.

Packaging and shipping
one.Outer packing: CZPT export carton with necessary transport marks
two.Inner packing: Water-proof packing with shock absorbing EPE and cardboard surrounded 
3.As for each the clients needs

Our services
one.Doing work time : eight:00 a.m – 10:00 p.m .Any queries, make sure you explain to us freely, we will be reply you asap.
2.Direct time : For samples, two to five days will be Alright. For mass generation, the direct time depend on the portions you want.
3.Warrantity time period : eighteen months and Life-long servicing services for the solution.
four.We settle for merchandise personalize.

FAQ
Q1: How to pick the suitable stepper or servo motor?
A1: There are serveral important items: size, duration, holding torque, voltage, recent and so forth.Following validate them and informed us, we can select the suited one for you.

Q2: Any other approaches to finalize the product?
A2: Sure, you can ship us the design you are using, we can help you discover the ideal one.

Q3:How to ensure the Quality of CZPT Areas?
A3: We have the integrated system for industrial elements quality handle. We have IQC (incoming quality control), IPQCS (in procedure high quality control area), FQC (ultimate quality control) and OQC (out-going quality manage) to handle each procedure of industrial parts prodution.

Q4:What’s the Advantage of Your Areas for Market Goods? 
A4:1.The edge of our items is the competitive charges, quickly supply and high quality. Our
workers are liable-oriented, pleasant-oriented,and diligent-oriented. Our merchandise are featured by strict tolerance, easy end and lengthy provider time.
2.Prior to we send out out the products,we examine them a lot more than three moments.

Speak to

 

Position Control Servo Motor Kit for Robot & CNC