Tk Series Synchronous Motor for Drive Compressors and Pumps Tk5000-16 2600 5000kv 10kv IP20

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk5000-16 2600 5000kv 10kv IP20

I. Overview
The large three-stage synchronous motor for TK sequence air compressor is a large-efficiency series solution specially developed and produced by our firm for the load of air compressor.
This series of motors adopts new technologies, new resources, new processes, beautiful material assortment, and advanced manufacturing. It has the characteristics of little measurement, light excess weight, gorgeous look, substantial performance, lower sound, lower vibration, secure and dependable operation, and practical use and servicing.

two. Implementation specifications
GB755 Rotating Motor Ranking and Efficiency
Classification of GB/T997 rotary motor construction sort, installation sort and junction box placement (IM code)
GB/T1571 Three-period synchronous motor take a look at method
GB/T1993 Rotating Equipment Cooling Approach
GB/T4942.1 Protection class (IP) classification of the overall composition of rotating electrical machines
GB/T10068 The measurement, analysis and limit of mechanical vibration with a shaft middle height of 56mm and previously mentioned
GB/T10069 Rotating Device Sounds Measurement Technique and Restrict
JB/T8667.one CZPT Conditions of Large A few-section Synchronous Motor Component 1: TK Sequence
three. Standard technological parameters
Electrical power selection: 250~10000KW
Rated voltage: 6000, 10000V
Rated speed: 250, 273, three hundred, 333, 375, 428, five hundred, 600r/min
Rated frequency: 50HZ
Safety stage: IP00, IP20, IP23, IP44
Insulation course: F
Quota: SI
Cooling strategy: IC01, IC37, IC81W
Installation strategy: IM7311, IM5710, IM7312, IM7315
*Can be produced according to other parameters according to person demands
4, complex qualities
four.1 The structural design and style is affordable, risk-free and dependable, and the ability to action out of step is powerful.
4.2 The primary insulation framework using new insulating components has high voltage resistance and lengthy motor life.
four.three The temperature increase margin is large. The motor adopts F-class insulation, and the temperature increase is assessed in accordance to the temperature rise limit of the B pole insulation.
four.4 The defense unit is innovative and full.
four.one.one The stator windings and bearings are geared up with temperature detection units, which can detect, alarm and excursion.
four.four.two Shutdown place heater with anti-condensation influence.
four.five Large inertia. Motors with different times of inertia can be made in accordance to person demands.
5, construction sort
5.1 The overall structure of this collection of motors is welded with steel plates for the body, end cover, and base plate. The motor is an impartial cavity, and the slip ring can be created with distinct security amounts according to consumer needs.
5.2 Stator: The stator frame is welded by steel plate. The motor stator outlet is led out by a substantial-voltage rubber cable. The outlet placement can be led out from the decrease part of the foundation or from the major junction box on the aspect of the motor.
The stator core is superimposed by low-loss silicon metal sheets, and the core sections are separated by radial air flow ducts.
The stator winding is F grade insulation, and the temperature rise is assessed according to B grade to help increase the service daily life. It adopts VPI total dipping paint treatment method, which has large electrical performance, mechanical toughness, insulation efficiency, moisture resistance and thermal security.
five.3 The rotor magnetic pole main is manufactured of laminated metal plates, and has various constructions this sort of as magnetic pole screws and T tails. The rotor bracket has ventilation holes and is geared up with a admirer, which can properly management the temperature increase of the rotor.
five.4 Undertake seat sort spherical sliding bearing. The bearings are insulated to avoid shaft currents.
Use new lubricating oil and slender-walled bearing alloy tiles, and set electromagnetic centerline signs.
5.5 In accordance to person requirements, the slip ring can be made as a optimistic strain ventilation structure to improve the security of the motor. The complete duration of the motor with the optimistic strain air flow composition of the slip ring is marginally improved.
6. Problems of Use
six.1 Voltage fluctuation: ±5% (It can operate below ±10% underneath the situations of 7.3 in GB755)
6.two Frequency fluctuation: ±2%
6.3 The altitude does not exceed 1000m
six.4 The greatest ambient temperature does not exceed +40ºC, and the minimal is 0ºC.
Seven, design description
 TK1250-16/2150

Outer diameter of stator punch (Φ2150mm)

Variety of poles (16 poles)

Rated electrical power (1250KW)
A few-stage synchronous motor for compressor
eight. Purchasing recommendations
eight.1 Just before putting an get, remember to refer to the merchandise catalog of this series to make clear the essential solution model, specs and other data. If there is a discrepancy in between the technical specs and the samples, make sure you get in touch with our firm.
8.two The motor product, rated power, synchronous velocity, rated voltage, rated frequency, safety degree, instant of inertia, rotation path, set up sort, and so forth. must be indicated when purchasing.
eight.3 The sample technological information sheet only lists the appropriate info of motors with rated voltages of 6KV and 10KV. If users want other voltage levels, our business can also offer related specialized knowledge when purchasing.
eight.4 The technological knowledge and dimensions in the sample are only for reference when the user selects the model. The formal details will be provided by the business right after the contract or complex arrangement is signed.
8.5 If there are any other unique needs, remember to offer the requirements and sign the appropriate technological arrangement when buying.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk5000-16 2600 5000kv 10kv IP20