Merchandise Description

A. Specification of 16mm 6V 12V 24V Micro DC Planetary Geared Motor for Shutters:

1. Voltage: 3V 6V 9V 12V 24V

two. Speed: 2-1800rpm

three. Torque: ten-4000g. cm rated torque

4. Gearbox 16mm Dia X fifteen.8-26.6mm duration
    Shaft: 3mm Dia X 15mm Duration

5. Motor’s voltage, velocity, torque, shaft can be customizied following evaluation,So make sure you enable me know your prerequisite about motor if you failed to from the suitable motor from site

six. The datasheet and cost selection only typical knowledge for reference, Gear motor’s value are usually make a decision by Motor’s reduction ratio and torque, Fell totally free to make contact with with me if you want this motor Specificaton or Drawing.

B. Firm Potential
 1. Manufacturing line

3. Certificates:

four Exhibitions And Client Visit:

five. FAQ(Q=Query, A=Reply)

Q: What is your major products?
A:We at the moment generate Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors and so forth. You can examine the technical specs for above motors on our website and you can e-mail us to advocate necessary motors for each your specification as well.

Q:How to pick a suitable motor?
A:If you have motor images or drawings to show us, or you have in depth specs like voltage, velocity, torque, motor dimensions, operating mode of the motor, needed daily life time and sound amount and so on, please do not wait to enable us know, then we can advise suitable motor for each your request accordingly.

Q: Do you have personalized provider for your regular motors?
A:Yes, we can customize for every your ask for for the voltage, pace, torque and shaft measurement/condition. If you need additional wires/cables soldered on the terminal or require to add connectors, or capacitors or EMC we can make it also.

Q:Do you have person design support for motors?
A:Of course, we would like to layout motors individually for our buyers, but it could want some CZPT charge and design and style cost. 

Q:Can I have samples for testing first?
A:Indeed, undoubtedly you can. Right after verified the necessary motor specs, we will estimate and supply a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.

Q:How do you make certain motor top quality?
A:We have our personal inspection techniques: for incoming supplies, we have signed sample and drawing to make sure experienced incoming supplies for manufacturing method, we have tour inspection in the process and ultimate inspection to make positive experienced goods ahead of delivery.

Q:What is your direct time?
A:Generally speaking, our standard regular solution will need twenty five-30days, a bit for a longer time for customized merchandise. But we are extremely adaptable on the guide time, it will is dependent on the particular orders

Q:What is actually your payment term?
A:For all our new consumers, we will need to have 40% deposite, 60% compensated just before cargo.

Q:When will you reply right after got my inquiries?
A:We will response within 24 hours when get your inquires.

Q:How can I trust you to make certain my funds is secure?
A:We are accredited by the third get together SGS and we have exported to above eighty five nations around the world up to June.2017. You can verify our track record with our recent customers in your region (if our customers do not brain), or you can buy by means of alibaba to get trade assurance from alibaba to make certain your funds is risk-free.

Q:What is actually the least order quantity?
A:Our minimal get amount is dependent on different motor designs, remember to e-mail us to verify. Also, we typically do not acknowledge personal use motor orders. 

Q:What is actually your shipping strategy for motors?
A:For samples and offers considerably less than 100kg, we generally recommend specific shipping For heavy packages, we typically advise air shipping or sea transport. But it all relies upon on our customers’ requirements.

Q:What certifications do you have?
A:We at the moment have CE and ROSH certifications.

Q:Can you send me your value record?
A:Since we have hundreds of distinct merchandise, and cost varies per diverse specifications, we are not CZPT to supply a price listing. But we can quote inside of 24 several hours when acquired your inquirues to make sure you can get the price in time.

Q:Can I visit your organization?
A:Of course, welcome to check out our firm, but remember to allow us know at the very least 2 weeks in advance to aid us make positive no other conferences during the day you pay a visit to us. Thanks!

Weclome speak to with us if have any inquiries about this motor or other products!

###

###

###

###

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

editor by czh 2023-01-19