Product Description

12V DC Electrical Home Equipment Motor with Encoder for Welding Equipment

Our Firm Site http://greatup

one. Stator measurement is optional
2. Secure, reputable, lower sounds, excellent commencing, lengthy daily life
three. Robust power
Rated voltage twelve-24vol/50Hz

Normal utilized: 
motor is commonly usedn in property appliances as Microwave turing plate, Quartz heater, Dishwasher, Can opener, Knife sharpener, washing equipment
 

ABOUT US

Ritscher group was established up in 2006.we usually concentrate on micro-motors for home electrical equipment and market appliance because environment up.currently we have 2 specialist micro-motor factories in China  which severally found in HangZhou metropolis and HangZhou metropolis.it has an location of 25,000 sq. meters vegetation and a lot more than 300 staff, annual output  is 3 million pcs and has 5 million pcs annual producing capacity.after several several years advancement,we had created a excellent popularity in the marketplace and received a lot more and much more customers’  trust in the entire world.
We  started out from shaded pole motors  at beginning, up to now,our item  included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our item  are extensively employed for generating fridges, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, massage equipment and a lot of other equipments.
As a realiable top quality warranty,Ritscher has complete R&D departement,QC office,making department,buy division and so forth. has perfect generating products like Aluminum diecasting, Zinc diecasting, Sheet metal stamping, Plastic injection molding and so on. also check/ detection system like multiplex temp measuring unit, performance parameter inspection gadget, Phenol peptide remedy pinhole tester,Anechoic space etc.
 
Endeavoring to give the best product and services to buyers,we often do the most effort to turn out to be an exceptional manufacturer of micro motors.
Ritscher is usually willing to establish honest business connection with buddies from all over the entire world.
Welcome make contact with with us!
 
Get CZPT ,get pleasure from present day life!

Our firm FAQ for you

(1) Q: What type motors you can offer?
A:For now,we mainly supply Kitchen Hood Motor,DC Motor,Gear Motor,Enthusiast Motor Fridge Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.

(2) Q: Is it possible to go to your manufacturing facility
A: Confident. But please kindly hold us posted a couple of times in progress. We want to check out our
timetable to see if we are accessible then.

(3) Q: Can I get some samples
A: It relies upon. If only a few samples for private use or replacement, I am concerned it will
be hard for us to offer, because all of our motors are custom manufactured and no stock
obtainable if there is no additional requirements. If just sample screening just before the official buy and
our MOQ, price tag and other conditions are suitable, we’d love to give samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is among a thousand~10,000pcs for different types after sample acceptance.
But it’s also all right for us to accept scaled-down lots like a handful of dozens, hundreds or 1000’s
For the original 3 orders after sample acceptance.For samples, there is no MOQ need. But the significantly less the much better (like no a lot more than 5pcs) on condition that the amount is sufficient in situation any adjustments required right after original tests.

###

###

###

###

###

###

###

###

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

editor by czh 2023-01-15