Area of Origin:ZheJiang , China (Mainland)
Design Amount:KYDBL4830-2E
Motor Variety:DC Motor
Solution identify:BLDC motor controller
Input volt:ten-55VDC
Output volt:-48VDC
Rated present:15A
Max present:30A
Software:AGV robot,Health care robot,Service robotic,Tracked robot
Management manner:-10V or handbook OR RS232 OR CAN
Encoder:Encoder suggestions
Excess weight:450g
Dimension:142* 117* 34mm
Electrical power range:
DC12-60V,Max ongoing existing:15A max peak recent:30A
2 channels output,Four quadrant functioning mode, regen brake
Working method:
Independence method,mix method, Speed method,torque method,place mode
Feed again:
Corridor sensor ,incremental encoder
Handle manner:
Potentiometer
In excess of existing ,over heating,above voltage,quick circuit
CAN RS 232 conversation,see the thorough interaction protocol when utilizing it.
Ideal for brushless dc motor, brushless servo motor
| Broad-range voltage enter | 10-55V |
| Ongoing existing/ max existing | 15A/30A |
| Doing work manner | Speed manner, torque manner, placement method |
| Operating temperature | -20ºC– +60ºC |
| Ambient humidity | Relative humidity≤80RH |
|
Impulse input selection |
500Hz-5000Hz |
|
Dimension |
142*117*34mm |
|
Fat |
450g |
Solution Software
KYDBL4830-2E is an smart brushless DC dual channel motor controller. The brushless dual-channel motor driver can handle two brushless DC motors at the exact same time. It adopts 32-bit large-performance MCU and innovative motion processing algorithm to realize internal electrical differential function. The controller utilizes the Corridor sign inside of the motor as the rotor situation suggestions and works with the exterior incremental encoder (one thousand-2500 line) signal to handle the movement of motor, acknowledging velocity open-loop, close-loop modes, situation mode and torque manner. It has two-way impartial driver chip, two-way encoder processing chip, two-way Hall sign processing chip. Meanwhile, it has numerous failure alarm functions. It has two working modes: impartial mode and mixed mode.
Impartial mode: It can understand entirely independent manage of two-way motor, and the manage sign portion is managed by two-way input alerts. Two-way brushless DC motor can manage the pace and path of motor, separately.
Combined manner: It can recognize the synchronous handle (CZPT, backward, still left and correct rotation) of two brushless motors.
The handle sign has as several as eight modes (wi-fi remote control, rocker, potentiometer, analog quantity, frequency, pulse width, RS232, CAN bus).
| SPECIFICATIONS | |||
|
Volt |
Volt | V | 10-55VDC |
| PWOER | W | 600 | |
| Internet Energy | W | 600 | |
|
Work method |
Velocity open-loop | ||
| close-loop manage | ° | ||
| torque close-loop manage | |||
|
control mode |
-5V analog quantity or pulse command management manner | ||
| RC (pulse width sign outputted by the receiver of aeromodelling distant manage) management manner. | |||
| potentiometer, analog quantity, frequency, pulse width, RS232, CAN bus | |||
