Lower Voltage Brushless Servo Motor For Engraving Device
57IV90/57IV130/57IV180 Functions
1.Working voltage: DC input voltage 15VDC to 50VDC ,recommend voltage is 36V
two.The max steady output existing is 10A, the max peak current is 22A (3 instances overload ability)
three.Satisfactory differential or solitary-ended pulse / course command, have a few manage mode of situation, velocity and torqe
4.Using FOC magnetic placement manage technology and area vector pulse width modulation (SVPWM) shut-loop management engineering
five.The number of pulses for every cycle (subdivision) can be set by the debug computer software or the dial swap placing(digital equipment ratio)
6.Have three types of 90w,130w and 180w DC brushless servo motor to choose.
7.Have protection of overvoltage, undervoltage, overcurrent and tolerance,and so forth.
8.Solitary / double pulse method, the pulse valid edge can be choose.
9.The max pulse frequency of management instruction is 500KHz (factory default is 200KHz)
ten.Pulse, path and allow sign input interface level is four.five to 28V suitable
eleven.With serial RS232 / RS485 debugging function, but require to use our particular serial debugging cable
twelve.Performance: sleek speed, tiny overshoot ,tiny monitoring error, reduced heat of motor and driver
Driver Model And Variety Xihu (West Lake) Dis.
| Motor Type | 57IV90 | 57IV130 | 57IV180 | |
| Rated power(W) | 90W | 130W | 180W | |
| Vector Maximum Current | 16A | 18A | 22A | |
| Body Length(MM) | 106.2 0.5 | 126.2 0.five | 146.2 0.5 | |
| Operation Voltage | fifteen-50Vdc,36Vdc recommend | |||
| Overvoltage Protection Voltage | 68Vdc±2 | |||
| Control Method | 32 bits DSP vector FOC control technology | |||
| Pulse Limit Frequency | 500KHz(factory default 200KHz) | |||
| Protection | Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm | |||
| Input Signal | Pulse, direction and enable differential / single-ended interface signal, interface level 4.five-28Vdc compatible, no need external current limiting resistor |
|||
| Output Signal | Alarm / in-position signal OC output, the output capacity is100mA, need external pull-up resistor, the maximum pull up voltage is 24Vdc |
|||
| Electronic Gear Ratio | Default 4000 / rev, through the DIP switch or debug software setting subdivision (two hundred-51200) |
|||
| Position Error Control Accuracy | ±1 Pulse | |||
| Speed Control Accuracy | ±2 rpm | |||
| Maximum Acceleration | 100 rpm/ms | |||
Dialing Change Configurations
| Pulse/Rev. | SW1 | SW2 | SW3 | SW4 |
| Default | ON | ON | ON | ON |
| 800 | OFF | ON | ON | ON |
| 1600 | ON | OFF | ON | ON |
| 3200 | OFF | OFF | ON | ON |
| 6400 | ON | ON | OFF | ON |
| 12800 | OFF | ON | OFF | ON |
| 25600 | ON | OFF | OFF | ON |
| 51200 | OFF | OFF | OFF | ON |
| 1000 | ON | ON | ON | OFF |
| 2000 | OFF | ON | ON | OFF |
| 4000 | ON | OFF | ON | OFF |
| 5000 | OFF | OFF | ON | OFF |
| 8000 | ON | ON | OFF | OFF |
| 10000 | OFF | ON | OFF | OFF |
| 20000 | ON | OFF | OFF | OFF |
| 40000 | OFF | OFF | OFF | OFF |
Subdivision precision (electronic gear ratio) :When SW1, SW2, SW3, SW4 are ON, the generate utilizes the inner default micro-action subdivision, the default interior subdivision of the driver is 400Pulse / rev, and the electronic equipment ratio can also be set by the debugging software. SW5 set the motor path,when turnON, the motor turns clockwise (CW),when switch OFF, the motor turns counterclockwise(CCW). SW6 management manner choice, whenON, the motor enters the self-check mode,producing a single CZPT and reverse revolution, has been recurring until finally exit self-examination manner, the exterior control signal is invalid at self test manner, whenOFF, the motor exits self-take a look at manner,then the exterior control sign is legitimate.
Mechanical Composition Dimension
| Driver mode | Motor body length(mm) | Driver thickness(mm) | Integrated motor driver length(mm) |
| 57IV90 | seventy six | thirty.2 | 106.two |
| 57IV130 | ninety six | thirty.two | 126.two |
| 57IV180 | 116 | 30.2 | 149.2 |
Note : All above is generally employed, and we can customize in accordance to your request or decide on the suitable product for you, please inform us subsequent parameters: existing, voltage, keeping torque, entire body size,the software location.
Software
Ideal for all varieties of tiny and medium-sized automation equipments and devices. This sort of as: laser equipment, health care tools, 3D printer, modest and medium-sized engraving machine, digital processing products, automated crawling gear, special CNC device device, packaging tools and robotic. It is specially valuable for customers who count on reduced noise and substantial velocity purposes.
Packaging and shipping and delivery
1.Outer packing: CZPT export carton with necessary shipping and delivery marks
2.Inner packing: Watertight packing with shock absorbing EPE and cardboard surrounded
three.As per the consumers requirements
Our support
1.Doing work time : 8:00 a.m – ten:00 p.m .Any inquiries, make sure you tell us freely, we will be reply you asap.
2.Direct time : For samples, two to 5 days will be Alright. For mass production, the direct time rely on the quantities you need.
3.Warrantity time period : eighteen months and Life-long servicing support for the item.
four.We accept items personalize.
FAQ
Q1: How to select the suitable stepper or servo motor?
A1: There are serveral essential products: measurement, duration, holding torque, voltage, current and so on.Following confirm them and instructed us, we can choose the suited a single for you.
Q2: Any other methods to finalize the design?
A2: Confident, you can send us the design you are employing, we can assist you discover the suitable a single.
Q3:How to promise the Good quality of CZPT Components?
A3: We have the built-in method for industrial areas quality control. We have IQC (incoming quality control), IPQCS (in procedure quality manage area), FQC (ultimate good quality manage) and OQC (out-going quality control) to manage every method of industrial components prodution.
This autumn:What is the Edge of Your Components for Market Merchandise?
A4:1.The benefit of our goods is the aggressive costs, quickly supply and substantial quality. Our
personnel are dependable-oriented, welcoming-oriented,and diligent-oriented. Our goods are showcased by strict tolerance, smooth complete and extended provider time.
2.Before we ship out the merchandise,we examine them more than 3 moments.
Speak to
