Product Introduction:
The doing work part of the vibrator is a rod-shaped hollow cylinder with an eccentric vibrator inside of, which is rotated at substantial velocity under the motor to create large-frequency micro-vibration. The vibration frequency can achieve 12000~15000 moments/min.
Theory:
There is an electromagnetic coil in the electromagnetic vibrator, via the electromagnetic
The functioning principle of the vibrator is revealed in the figure
The doing work principle of the vibrator is shown in the determine
The present of the coil is a pulse recent that is 50 %-wave rectified. In the good half wave, the existing passes, the electromagnet has suction, and the vibrating plate is captivated in the damaging 50 percent wave, no recent passes, the electromagnet suction disappears, and the vibrating plate returns to the first placement due to the action of the spring, and offers The coal channel is connected to the vibrating plate, so that below the motion of the electromagnetic vibrator, the coal channel is continually vibrated.
Characteristics:
1.Handy and relaxed to function because of to the design and style of the motor and mild weight
2.CZPT-insulation for the motor enhance the protected procedure greatly
3.Working with the single section electricity source, very appropriate for specific use.
4.Always effortless and convenience to take care of and operation.
Parameter:
| Model | Energy(HP) | Voltage(V) | Frequency(Hz) | G.W.(kg) | Material Body | Dimension(cm) |
| ZN-50CQ | two.0 | 220/380 | fifty/60 | 16 | Iron Smooth | 37*28*thirty |
| ZN-70CQ | 3.0 | 220/380 | fifty/60 | 18 | Iron Smooth | 39.5*28*30 |
| ZN-50XC | two.0 | 220/380 | 50/60 | fourteen | Aluminum | 36*28*thirty |
| ZN-70XC | 3.0 | 220/380 | 50/60 | sixteen | Aluminum | 39*28*thirty |
| ZN-50MD | 2.0 | 220/380 | fifty/sixty | 14 | Iron Smooth | 36*28*30 |
| ZN-70MD | 3.0 | 220/380 | 50/sixty | sixteen | Iron Smooth | 39*28*thirty |
Matched vibrator shaft
| Product | Concrete vibrator shaft | ||||||
| Design | ¢(mm) | ZX35 | ZX-38 | ZX-forty five | ZX-fifty | ZX-sixty | ZX-70 |
| Diameter of head | ¢(mm) | 35 | 38 | forty five | 50 | 50 | 70 |
| Duration of head | L (mm) | 380 | 420 | 420 | 480 | 410 | 450 |
| Vibrating Frequency | (HZ) | 183 | 185 | 185 | two hundred | two hundred | two hundred |
| Vibrating Ampitude | (mm) | .ninety one | one | one.two | 1.15 | 1.15 | one.35 |
| Dia of flexiable hose | D(mm) | 30 | 30 | 32 | 36 | 36 | 36 |
| Diaof flexiable shaft | D(mm) | 10 | ten | 10 | 13 | 13 | thirteen |
Specifics:
